How to blend pastels: tools, paper and uses
Ondine de PerettiWould you like softer gradients with your Neocolor II, even flat washes of colour, or misty atmospheres, all with dry techniques? Then this article is for you!
The technique that changes everything is blending. It smooths and unifies an area with very simple tools. I will explain how it works, show you the two main levels of blending and what each one is for, then put them into practice in a misty mountain landscape.
Contents
- Blending, two levels of pressure
- What blending lets you do
- The three blending tools
- The paper changes the result
- Mistakes to avoid
- Going further: underpainting and sgraffito
- Bonus: a misty mountain landscape
- Your questions
Blending, two levels of pressure
There are several levels of blending with water-soluble pastels.
Light blending: you press gently. The pastel stays on the paper, and it can be pulled, spread or mixed with the colour next to it. This is what I do when two colours overlap and I want them to melt into each other as smoothly as possible. I mostly use this one on small areas.
Heavy blending: you press hard. Here you lift the pastel off and spread it around. Almost no pigment is left sitting on the surface, only the colour that has caught in the paper. It may sound counter-intuitive for pastels, whose whole appeal is their body and their texture, but you will see that it opens up a lot!
What blending lets you do
Blending evens out a flat area of colour and melts colours together. Even when it is applied carefully, a flat area always keeps visible strokes, and a light blend unifies it. To melt two colours together you can also layer them, which is the gradient technique I cover in my complete guide to Neocolor II techniques, and blending refines those gradients.
But you can go much further by lifting off all the pastel. The whole thing rests on one fact: the first colour you lay down is the one that marks the paper.
1. Melting two colours with no visible join
So, to melt two blended colours into each other, you need to lift and spread the pastel with every new colour: the edges diffuse, and the next colour arrives on a soft transition. If you lay all your colours down first and blend at the end, you will see hard joins. The tutorial at the end of this article shows it clearly.
2. Helping the next layer grip
Adding a second colour on top of a layer that still has body does not work well: the colours do not grip, light tones barely show, dark ones come out muted, and some of them go dull.
Lift all of it off by blending instead, and the paper becomes available again: the next colour grips far better and comes out crisper, much closer to the colour of the pastel itself. Do try it: lay the same colour down twice, side by side, blend one of the two until nothing is left, then run a second colour over both. You will see the difference straight away!
This is how I get a really deep indigo over an area that is already coloured, or small flowers that stand out against a coloured background.
3. Correcting
Once the pastel has been lifted off, you can gently erase the colour. You will not get back to pure white, as some of the pigment stays caught in the paper, but you will lighten the colour noticeably and you can then apply another one on top. It is a small margin for recovery that can be very handy.
The three blending tools
As we have just seen, blending needs something to blend. It is the pastel itself that you are moving around, so you have to lay down enough of it for it to be spread. The good news is that you can always add more and blend again if you are short. You will know, because you will still see marks on the paper after blending.
After that, the tool you choose depends on the size of the area and the effect you are after.
The blending stump
This tool lifts pastel off, or mixes two colours together, on a very precise spot. I use it for details, for the border between two colours and for small areas.
A blending stump gets dirty quickly, so sand it on a piece of glasspaper to take the tinted surface off.
The finger
It moves the pigment and spreads it over a wider area. It unifies without lifting off too much, because pastel grips far less on skin than on a stump. It also warms the wax in the pastels, which makes it more malleable and easier to pull.
The cloth
Wrapped around your finger, this is the most effective way to lift pastel off. With light pressure it unifies a large area beautifully. Press hard and it takes everything: all that is left is the colour caught in the paper, with a slightly grainy texture a bit like photographic grain. I love that result, especially for skies and backgrounds.
Its limit is precision. It can only be used on areas wide enough for circular movements. When I blend close to the edge of a drawing, I put masking tape down to keep a clean white border.
The paper changes the result
I made exactly the same movement, with the same colour, on two different papers, and the results have nothing in common.
On smooth paper, the colour slides and spreads easily. Heavy blending works very well: I lift off almost everything and I get a very soft, even surface.
On textured paper, the pastel catches in the hollows, so I lift off far less. On the other hand, blending solves the classic problem of textured paper: those little white dots that stay visible in a flat area disappear.
Worth knowing
Colours do not all spread in the same way either. Indigo, for instance, marks far more than salmon pink, and it needs to be blended in small circles so it does not take you by surprise. Test on a scrap of paper before you start.
Mistakes to avoid
Protect the edges. Blending pulls colour well beyond the area you have coloured. I build a frame of masking tape (mostly washi tape) all around the drawing so that I can rub right up to the edge without going over.
Check that nothing is left. I tilt the sheet towards the light, and any pastel still sitting on the surface catches the light. I also go by feel: if the cloth still grips, there is more to lift off.
Move to a clean part of the cloth. It loads up with pigment with every pass. Before I come close to a light area, I take a fresh part of the cloth so that I have a clean surface, otherwise I lay the previous colour down on it.
Going further: underpainting and sgraffito
Once you understand that the first layer marks the paper and that blending frees the surface up again, two more techniques open up.
The underlayer. I cover the whole sheet with one colour, blend it off completely, and then work on top as if I were on coloured paper, which gives a lovely overall harmony. It only works with very light tones. With a white underlayer, I can bring white back later.
Sgraffito. Same logic: the top layer comes away and reveals the one underneath. By scratching with a point, I bring the hidden colour back as very fine lines: branches, the veins of a leaf, snow-covered fir trees in a night sky, stars. You simply have to plan ahead, and lay down first the colour you will want to bring back.
Both techniques, with their full demonstrations, are part of the dry techniques module of my course Water-soluble pastels for beginners, where I combine them in a series of mini landscapes.
Bonus: a misty mountain landscape
To see heavy blending at work from start to finish, I filmed a misty mountain landscape.
The sky is built colour after colour, from the lightest pink through to indigo, each colour blended before the next one goes down. The mountains come afterwards, on top of the blended sky: the far plane in lavender blue, very light, the near one in indigo, pressing hard. I blend the base of each ridge for a misty effect and keep the skylines crisp.
As for colours, six shades and white: salmon pink, peach blossom, aubergine, indigo, lavender blue and light cobalt blue.
If you are just starting out with these pastels, I have gathered the essentials in my article on how to use Neocolor II.
Your questions
What can I blend with if I do not have a blending stump?
A finger and a cotton cloth already cover the vast majority of situations. For precise areas, you can use a cotton bud.
Why does my colour go pale when I blend?
Blending lifts pastel off and lightens the tone. If you want the intensity back, lay a second coat over the area you have already blended.
Do I need a particular paper?
I work on a smooth paper such as bristol when I want the cleanest blends and the softest gradients. Blending works on textured paper too, it simply lifts off less.
Going further
To get to know Neocolor II without spending anything, start with my free mini-course on water-soluble pastels.
And if you want every dry and wet technique, the side by side demonstrations and the guided projects, they are all in my online course Water-soluble pastels for beginners.